KDØIOE DMR Repeater

Repeater Setup 2019
Repeater Cabinet Setup as of April 2019

Repeater Info

Frequency: 444.625MHz CC1 (input 449.625MHz, standard 5MHz offset)
Location: West Fargo, ND
APRS SSID: KDØIOE-R
TX Radio: Motorola CM200
RX Radio: Motorola CM200
Power Output: 20W
Antenna: Comet GP-3 @ peak of roof. Approx 20ft AGL
Raspberry Pi 3B with a Repeater-Builder STM32-DVM add-on board – Pi-Star 3.4.17
Wired Ethernet to the RPi for Internet connectivity
Last Heard on DMR
Dashboard
Controller Status

DMR Timeslot Info

The repeater is tied to both the Brandmeister and TGIF networks (not cross-linked on any TG’s). The only TGIF network talkgroup that is linked is 707 on timeslot 1.

Recommended Codeplug Setup

ChannelTGTimeslotStatic/Dynamic
North Dakota31382Static
Allstar 49973499732Static
Local (Repeater only)92Static
Rural MN (TGIF Network)7071Static
RRDigital Cluster21Static
Northstar312732Static
Minnesota31272Dynamic
Midwest31691Dynamic
Static talkgroups are always available. If traffic is sent on those from their network, they will be broadcast on the repeater. Dynamic talkgroups require you to PTT once on that talkgroup before they will be carried on the repeater. Typically they will timeout after 10-15 minutes.